Accessories FM Folders

ifold is a patent-pending product featuring a tutorial interface available only on the new “ifold” series BAUM floor model folders. ifold is an industrial computer with a touch-screen monitor that provides information to the operator on setup, maintenance, operation, troubleshooting and more. It does not drive any automated settings when it is sold as the ifold on manual-setup BAUM ifold series folders.

To detect paper jams as they occur at the exit end of a folding station, automatically stopping the folder. A diagnostic message will appear on the 2020 operator panel when a jam is detected.

BAUM offers a wide selection of center trim kits. BAUM has center trim kits for 7/8 inch, 1-1/8 inch and 35 mm diameter shafts. The model or folder determines which diameter slitter shaft is used. The width of the strip to be removed needs to be determined before ordering the kit.

BAUM offers edge trim kits for 7/8inch, 1-1/8inch and 35mm diameter slitter shafts. The model and shaft size determine which kit is used. The kits include the edge strippers that deflect the waste to the floor when trimming.

Mounts to the exit end of the last folder in the setup. A metal plate is triggered by a solenoid to “kick” the sheet as it passes the exit area to turn it. This provides a marker of the batch.

Mounts at the exit area of the last folder in the setup. Provides a second count to compare to the first count of the sensor reading at the pile feeder count. Also provides an added bonus of serving as a jam detector if the sheet stays under the sensor too long.

These fold plates have grooved areas in the intake nose so that live glue does not make contact with the fold plate. There is normally a grooved, relieved area wherever there is not a rib in the fold plate.

This power box provides the capability to operate 8-page and 16-page right angle folders independently from the parallel 1st station folder. The box includes the capability to connect both the 8 and 16 page and operate at the same time, 2-tiered rollaway delivery, hang on delivery, remote control, VDS delivery, and BAUM presser stacker deliveries. It includes an on button, E-stop and overload indicator light. The box is mounted in the field.

Converts existing hang-on stacker to become a free-standing mobile unit. Adjustable height mechanism.

This assembly controls the last four marbles on the crosscarrier to hold the sheet against the gage, ensuring that the sheet is guided squarely into the fold rolls. only used on the right-angle folders.

A special, very fine perforation that tears clean when pulled apart. This perf is used for stocks that need perforations and must be fed again through copiers, laser printers, etc.

BAUM offers a wide selection of perforating kits. BAUM has perforating kits for 7/8 inch, 1-1/8 inch and 35 mm diameter shafts. The model of folder determines which diameter slitter shaft is used. The perf kit selection includes very coarse to very fine perforations per inch capability.

Enables the operator to control sheet feeding and folder drive from the delivery. It also provides a portable control to assist setup for perfing, scoring and slitting, and for sending test sheets when setting fold plates.